Installing micro irrigation system

Landscape Construction View Course. Garden Maintenance Course - For professonal gardeners, those setting up a business or the home gardener. View Course. Alternative Energy Course - Learn about home energy consumption, energy management, alternative energy generation and storage.

Aquaponics Ebook - easy to read: home systems, commercial systems, media, fish species, fish care. A micro-irrigation system can be fitted to any garden tap. Two way connectors allow you to use a hose or fill a watering can on one side,and to connect your irrigation system to the other. Sprinklers need to be monitored for blockages or damage from animals or children.

Micro-irrigation spray nozzles. Clean and check all emitters. Fittings filter 13mm. Pressure Regulator 25 Psi. TIPS: Contract a professional irrigation designer; insist on a system to suit your plants and your soil. Install efficient micro-irrigation emitters wherever possible. Place the battery Attach the timer to the faucet Set your program.

Connect your regular watering hose to the end of the timer Connect the irrigation plant The irrigation plant is the starting component needed to reduce the water pressure to 1. Connect the irrigation unit directly to the water outlet or the garden hose; Make sure it is tight.

Deploy your main network Your main network provides water for the entire system over long distances. Be sure to walk around the area before cutting. Keep a few extra inches in case of miscalculation. Place your pipes above the areas indicated on your plan. Connect your secondary network Your secondary network provides water to a plant individually end of line and watering a row of plants for a short distance in line.

The pipes should be placed near the roots of your plants. Connect the small pipes to your connectors. Install the drippers At this stage, your pipes should be connected together to make way for drippers. To place a dripper on an end-to-end line, make a hole with the installation tool , then push in the dripper. Do not use a nail or other pointed object other than a punch because you could create irregular holes that cause leaks.

End-of-line emitters are installed directly at the end of a small pipe. Install the micro-sprinklers The micro-sprinklers spray nozzle allow the water to be diffused in fine mist stably or in rotation at , or 90 degrees. Using the installation tool, drill the tubes where you want to put your sprinklers. Screw the sprinklers firmly. Close your lines Before closing a line, see if you can install an end-of-line drip to optimize watering, otherwise, there are two types of caps for your pipes: small and large.